NAV 
Firmer Chisels
The cutting edges are ground with a standard angle of approximately 25°.
The angle of the cutting edge can be adapted to the wood you work with (hard or soft). Before the first use the cutting edge should be honed to a sharp working edge.
|
Firmer chisel, short length, light pattern, bevelled edges, with flat hornbeam handle
Available in the following Sizes:
2 mm (1001002),
3 mm (1001003),
4 mm (1001004),
6 mm (1001006),
8 mm (1001008),
10 mm (1001010),
12 mm (1001012),
14 mm (1001014),
16 mm (1001016),
18 mm (1001018),
20 mm (1001020),
22 mm (1001022),
24 mm (1001024),
26 mm (1001026),
28 mm (1001028),
30 mm (1001030),
32 mm (1001032),
35 mm (1001035),
40 mm (1001040),
45 mm (1001045),
50 mm (1001050)
To prevent the tools from corrosion, we recommend applying a small amount of oil on the tools after use or before storing them for a longer period.
Before storing the tools, moisten the blade with a cloth lightly soaked in oil (white oil or our art. no. 3708000).
|
Firmer chisel, short length, light pattern, bevelled edges, with octagonal hornbeam handle and hammer button
Available in the following Sizes:
2 mm (1002002),
4 mm (1002004),
6 mm (1002006),
8 mm (1002008),
10 mm (1002010),
12 mm (1002012),
14 mm (1002014),
16 mm (1002016),
18 mm (1002018),
20 mm (1002020),
22 mm (1002022),
24 mm (1002024),
26 mm (1002026),
28 mm (1002028),
30 mm (1002030),
32 mm (1002032),
35 mm (1002035),
40 mm (1002040),
45 mm (1002045),
50 mm (1002050)
To prevent the tools from corrosion, we recommend applying a small amount of oil on the tools after use or before storing them for a longer period.
Before storing the tools, moisten the blade with a cloth lightly soaked in oil (white oil or our art. no. 3708000).
|
Firmer chisel, short length, light pattern, bevelled edges, with flat plastic handle
Available in the following Sizes:
2 mm (1003002),
3 mm (1003003),
4 mm (1003004),
6 mm (1003006),
8 mm (1003008),
10 mm (1003010),
12 mm (1003012),
14 mm (1003014),
16 mm (1003016),
18 mm (1003018),
20 mm (1003020),
22 mm (1003022),
24 mm (1003024),
26 mm (1003026),
28 mm (1003028),
30 mm (1003030)
To prevent the tools from corrosion, we recommend applying a small amount of oil on the tools after use or before storing them for a longer period.
Before storing the tools, moisten the blade with a cloth lightly soaked in oil (white oil or our art. no. 3708000).
|
Firmer chisel, short length, light pattern, bevelled edges, with flat 2-component handle
Available in the following Sizes:
2 mm (1008002),
3 mm (1008003),
4 mm (1008004),
6 mm (1008006),
8 mm (1008008),
10 mm (1008010),
12 mm (1008012),
14 mm (1008014),
16 mm (1008016),
18 mm (1008018),
20 mm (1008020),
22 mm (1008022),
24 mm (1008024),
26 mm (1008026),
28 mm (1008028),
30 mm (1008030)
To prevent the tools from corrosion, we recommend applying a small amount of oil on the tools after use or before storing them for a longer period.
Before storing the tools, moisten the blade with a cloth lightly soaked in oil (white oil or our art. no. 3708000).
|
Firmer chisel halflong, strong pattern, bevelled edges, with flat hornbeam handle
Available in the following Sizes:
10 mm (1031010),
16 mm (1031016),
20 mm (1031020),
26 mm (1031026),
30 mm (1031030)
To prevent the tools from corrosion, we recommend applying a small amount of oil on the tools after use or before storing them for a longer period.
Before storing the tools, moisten the blade with a cloth lightly soaked in oil (white oil or our art. no. 3708000).
|
The chisels are factory delivered with a cutting edge angle of 25°. This angle is suitable for soft to medium hard wood. We recommend using a sharpening stone to remove the bar of the cutting edge of our chisels before using them for the first time. Working with chisels of normal length is cumbersome in staircase areas or inside drawers and not satisfying. Here these short chisels perform best services. Total length only 165 mm!
Available in the following Sizes:
6 mm (1071006),
10 mm (1071010),
12 mm (1071012),
16 mm (1071016),
20 mm (1071020),
22 mm (1071022),
26 mm (1071026),
35 mm
(1071035)
To prevent the tools from corrosion, we recommend applying a small amount of oil on the tools after use or before storing them for a longer period.
Before storing the tools, moisten the blade with a cloth lightly soaked in oil (white oil or our art. no. 3708000).
|
To prevent the tools from corrosion, we recommend applying a small amount of oil on the tools after use or before storing them for a longer period.
Before storing the tools, moisten the blade with a cloth lightly soaked in oil (white oil or our art. no. 3708000).
